Merge branch 'v3.11-next/driver-gpio' into v3.11-next/s3c24xx-driver

		#gpio-cells = <4>;

		gpio-controller;

	};

Samsung S3C24XX GPIO Controller

Required properties:

- compatible: Compatible property value should be "samsung,s3c24xx-gpio".

- reg: Physical base address of the controller and length of memory mapped

  region.

- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes

  should be the following with values derived from the SoC user manual.

     <[phandle of the gpio controller node]

      [pin number within the gpio controller]

      [mux function]

      [flags and pull up/down]

  Values for gpio specifier:

  - Pin number: depending on the controller a number from 0 up to 15.

  - Mux function: Depending on the SoC and the gpio bank the gpio can be set

                  as input, output or a special function

  - Flags and Pull Up/Down: the values to use differ for the individual SoCs

                    example S3C2416/S3C2450:

                            0 - Pull Up/Down Disabled.

                            1 - Pull Down Enabled.

                            2 - Pull Up Enabled.

          Bit 16 (0x00010000) - Input is active low.

  Consult the user manual for the correct values of Mux and Pull Up/Down.

- gpio-controller: Specifies that the node is a gpio controller.

- #address-cells: should be 1.

- #size-cells: should be 1.

Example:

	gpa: gpio-controller@56000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		compatible = "samsung,s3c24xx-gpio";

		reg = <0x56000000 0x10>;

		#gpio-cells = <3>;

		gpio-controller;

	};

		s3c_gpiolib_track(chip);

}

#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF)

static int s3c24xx_gpio_xlate(struct gpio_chip *gc,

			const struct of_phandle_args *gpiospec, u32 *flags)

{

	unsigned int pin;

	if (WARN_ON(gc->of_gpio_n_cells < 3))

		return -EINVAL;

	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))

		return -EINVAL;

	if (gpiospec->args[0] > gc->ngpio)

		return -EINVAL;

	pin = gc->base + gpiospec->args[0];

	if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))

		pr_warn("gpio_xlate: failed to set pin function\n");

	if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))

		pr_warn("gpio_xlate: failed to set pin pull up/down\n");

	if (flags)

		*flags = gpiospec->args[2] >> 16;

	return gpiospec->args[0];

}

static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = {

	{ .compatible = "samsung,s3c24xx-gpio", },

	{}

};

static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,

						 u64 base, u64 offset)

{

	struct gpio_chip *gc =  &chip->chip;

	u64 address;

	if (!of_have_populated_dt())

		return;

	address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;

	gc->of_node = of_find_matching_node_by_address(NULL,

			s3c24xx_gpio_dt_match, address);

	if (!gc->of_node) {

		pr_info("gpio: device tree node not found for gpio controller"

			" with base address %08llx\n", address);

		return;

	}

	gc->of_gpio_n_cells = 3;

	gc->of_xlate = s3c24xx_gpio_xlate;

}

#else

static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,

						 u64 base, u64 offset)

{

	return;

}

#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */

static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,

					     int nr_chips, void __iomem *base)

{

			gc->direction_output = samsung_gpiolib_2bit_output;

		samsung_gpiolib_add(chip);

		s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10);

	}

}