Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1d00d6c1 authored by Jean-François Moine's avatar Jean-François Moine Committed by Mauro Carvalho Chehab
Browse files

[media] gspca: Convert some uppercase hexadecimal values to lowercase 



Signed-off-by: default avatarJean-François Moine <moinejf@free.fr>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent a79cc7b9

drivers/media/video/gspca/cpia1.c

+5 −5
Original line number Diff line number Diff line
@@ -37,7 +37,7 @@ MODULE_LICENSE("GPL"); 
/* constant value's */

#define MAGIC_0		0x19

#define MAGIC_1		0x68

#define DATA_IN		0xC0

#define DATA_IN		0xc0

#define DATA_OUT	0x40

#define VIDEOSIZE_QCIF	0	/* 176x144 */

#define VIDEOSIZE_CIF	1	/* 352x288 */
@@ -660,9 +660,9 @@ static int do_command(struct gspca_dev *gspca_dev, u16 command, 
		if (sd->params.qx3.button) {

			/* button pressed - unlock the latch */

			do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,

				   3, 0xDF, 0xDF, 0);

				   3, 0xdf, 0xdf, 0);

			do_command(gspca_dev, CPIA_COMMAND_WriteMCPort,

				   3, 0xFF, 0xFF, 0);

				   3, 0xff, 0xff, 0);

		}



		/* test whether microscope is cradled */
@@ -1110,12 +1110,12 @@ static int command_setlights(struct gspca_dev *gspca_dev) 
	p2 = (sd->params.qx3.toplight == 0) << 3;



	ret = do_command(gspca_dev, CPIA_COMMAND_WriteVCReg,

			 0x90, 0x8F, 0x50, 0);

			 0x90, 0x8f, 0x50, 0);

	if (ret)

		return ret;



	return do_command(gspca_dev, CPIA_COMMAND_WriteMCPort, 2, 0,

			  p1 | p2 | 0xE0, 0);

			  p1 | p2 | 0xe0, 0);

}



static int set_flicker(struct gspca_dev *gspca_dev, int on, int apply)

drivers/media/video/gspca/m5602/m5602_ov9650.c

+1 −1
Original line number Diff line number Diff line
@@ -624,7 +624,7 @@ static int ov9650_set_gain(struct gspca_dev *gspca_dev, __s32 val) 


	/* Mask away all uninteresting bits */

	i2c_data = ((val & 0x0300) >> 2) |

			(i2c_data & 0x3F);

			(i2c_data & 0x3f);

	err = m5602_write_sensor(sd, OV9650_VREF, &i2c_data, 1);

	if (err < 0)

		return err;

drivers/media/video/gspca/pac207.c

+2 −2
Original line number Diff line number Diff line
@@ -162,7 +162,7 @@ static const __u8 pac207_sensor_init[][8] = { 
	{0x10, 0x12, 0x0d, 0x12, 0x0c, 0x01, 0x29, 0x84},

	{0x49, 0x64, 0x64, 0x64, 0x04, 0x10, 0xf0, 0x30},

	{0x00, 0x00, 0x00, 0x70, 0xa0, 0xf8, 0x00, 0x00},

	{0x32, 0x00, 0x96, 0x00, 0xA2, 0x02, 0xaf, 0x00},

	{0x32, 0x00, 0x96, 0x00, 0xa2, 0x02, 0xaf, 0x00},

};



static int pac207_write_regs(struct gspca_dev *gspca_dev, u16 index,
@@ -228,7 +228,7 @@ static int sd_config(struct gspca_dev *gspca_dev, 


	idreg[0] = pac207_read_reg(gspca_dev, 0x0000);

	idreg[1] = pac207_read_reg(gspca_dev, 0x0001);

	idreg[0] = ((idreg[0] & 0x0F) << 4) | ((idreg[1] & 0xf0) >> 4);

	idreg[0] = ((idreg[0] & 0x0f) << 4) | ((idreg[1] & 0xf0) >> 4);

	idreg[1] = idreg[1] & 0x0f;

	PDEBUG(D_PROBE, "Pixart Sensor ID 0x%02X Chips ID 0x%02X",

		idreg[0], idreg[1]);

drivers/media/video/gspca/sonixb.c

+2 −2
Original line number Diff line number Diff line
@@ -340,7 +340,7 @@ static const __u8 ov6650_sensor_init[][8] = { 
		 * but blue wont be there. Avoid this data ... */

	{0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10}, /* format out? */

	{0xd0, 0x60, 0x26, 0x01, 0x14, 0xd8, 0xa4, 0x10},

	{0xa0, 0x60, 0x30, 0x3d, 0x0A, 0xd8, 0xa4, 0x10},

	{0xa0, 0x60, 0x30, 0x3d, 0x0a, 0xd8, 0xa4, 0x10},

	/* Enable rgb brightness control */

	{0xa0, 0x60, 0x61, 0x08, 0x00, 0x00, 0x00, 0x10},

	/* HDG: Note windows uses the line below, which sets both register 0x60
@@ -505,7 +505,7 @@ static const __u8 pas202_sensor_init[][8] = { 
	{0xa0, 0x40, 0x02, 0x04, 0x00, 0x00, 0x00, 0x10},

	{0xd0, 0x40, 0x04, 0x07, 0x34, 0x00, 0x09, 0x10},

	{0xd0, 0x40, 0x08, 0x01, 0x00, 0x00, 0x01, 0x10},

	{0xd0, 0x40, 0x0C, 0x00, 0x0C, 0x01, 0x32, 0x10},

	{0xd0, 0x40, 0x0c, 0x00, 0x0c, 0x01, 0x32, 0x10},

	{0xd0, 0x40, 0x10, 0x00, 0x01, 0x00, 0x63, 0x10},

	{0xa0, 0x40, 0x15, 0x70, 0x01, 0x00, 0x63, 0x10},

	{0xa0, 0x40, 0x18, 0x00, 0x01, 0x00, 0x63, 0x10},

drivers/media/video/gspca/spca561.c

+1 −1
Original line number Diff line number Diff line
@@ -597,7 +597,7 @@ static void setgain(struct gspca_dev *gspca_dev) 
	else if (sd->gain < 128)

		gspca_dev->usb_buf[0] = (sd->gain / 2) | 0x40;

	else

		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xC0;

		gspca_dev->usb_buf[0] = (sd->gain / 4) | 0xc0;



	gspca_dev->usb_buf[1] = 0;

	reg_w_buf(gspca_dev, 0x8335, 2);