Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 19df9926 authored by Vandana Jain's avatar Vandana Jain Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Added Camera dtsi for SDM450 QRD 



Camera Sensor Supply conflicts between QRD's
8953/450 targets as SDM450 is using
msm8953-camera-sensor dtsi.

Added new Camera dtsi for SDM450 QRD.

Change-Id: I625567b1f6b192d1df18f7f7a82657ab181ac009
Signed-off-by: default avatarVandana Jain <vandja@codeaurora.org>
parent 0ca7a05c

arch/arm64/boot/dts/qcom/sdm450-camera-sensor-qrd.dtsi

0 → 100644
+232 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2020, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&cci {

	#address-cells = <1>;

	#size-cells = <0>;



	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2850000>;

		qcom,cam-vreg-max-voltage = <2850000>;

		qcom,cam-vreg-op-mode = <80000>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		compatible = "qcom,eeprom";

		qcom,cci-master = <0>;

		reg = <0x0>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vaf-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vio", "cam_vdig", "cam_vaf";

		qcom,cam-vreg-min-voltage = <0 1200000 2850000>;

		qcom,cam-vreg-max-voltage = <0 1200000 2850000>;

		qcom,cam-vreg-op-mode = <0 105000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default

				&cam_sensor_rear_vana>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep

				&cam_sensor_rear_vana_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>,

			<&tlmm 134 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_STANDBY0",

					"CAM_VANA";

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <19200000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		qcom,cci-master = <1>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vana-supply = <&pm8953_l22>;

		cam_vio-supply = <&pm8953_l6>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

						&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front1_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 129 0>,

			<&tlmm 130 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-mode = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <19200000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,led-flash-src = <&led_flash0>;

		qcom,eeprom-src = <&eeprom0>;

		qcom,actuator-src = <&actuator0>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vaf-supply = <&pm8953_l17>;

		cam_vana-supply = <&pm8953_l22>;

		qcom,cam-vreg-name = "cam_vio", "cam_vdig", "cam_vaf",

						"cam_vana";

		qcom,cam-vreg-min-voltage = <0 1200000 2850000 2800000>;

		qcom,cam-vreg-max-voltage = <0 1200000 2850000 2800000>;

		qcom,cam-vreg-op-mode = <0 105000 100000 80000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

				&cam_sensor_rear_default

				&cam_sensor_rear_vana>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep

				&cam_sensor_rear_vana_sleep>;

		gpios = <&tlmm 26 0>,

			<&tlmm 40 0>,

			<&tlmm 39 0>,

			<&tlmm 134 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-vana = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

			"CAM_RESET0",

			"CAM_STANDBY0",

			"CAM_VANA";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vana-supply = <&pm8953_l22>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vaf-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 131 0>,

			<&tlmm 132 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "disabled";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <270>;

		qcom,eeprom-src = <&eeprom2>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vana-supply = <&pm8953_l22>;

		cam_vio-supply = <&pm8953_l6>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 129 0>,

			<&tlmm 130 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};

arch/arm64/boot/dts/qcom/sdm450-qrd-sku4.dtsi

+2 −2
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.

 * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -13,7 +13,7 @@ 


#include "msm8953-qrd.dtsi"

#include "msm8953-mdss-panels.dtsi"

#include "msm8953-camera-sensor-qrd.dtsi"

#include "sdm450-camera-sensor-qrd.dtsi"



&qusb_phy {

	qcom,qusb-phy-init-seq = <0x78 0x80