Documentation: dt: input: add details for raydium touch node

Raydium WT030 touch controller

Please add this description here: The Raydium Touch controller is connected to the

host processor via I2C. The controller generates interrupts when the user touches

the panel. The host controller is expected to read the touch coordinates over I2C and

pass the coordinates to the rest of the system.

Required properties:

 - compatible                     : should be "raydium,raydium-ts".

 - reg                                : i2c slave address of the device.

 - interrupt-parent               : parent of interrupt.

 - raydium,irq-gpio               : irq gpio.

 - raydium,reset-gpio         : reset gpio.

 - vdd_ana-supply                         : analog voltage power supply needed to power device.

 - vcc_i2c-supply                         : i2c voltage power supply needed to power device.

Optional property:

 - raydium,max-num-touches   : addr of ub-i2c.

 - raydium,display-coords    : array of display coordinates.

 - raydium,x_max                    : maximal x value of the panel.

 - raydium,y_max                    : maximal y value of the panel.

 - raydium,fw_id             : firmare id.

 - raydium,soft-reset-delay-ms    : reset delay for controller (ms), default 100.

 - raydium,hard-reset-delay-ms    : reset delay for controller (ms), default 100.

Example:

       i2c@78b7000 {

               status = "ok";

               raydium_ts@39 {

                       compatible = "raydium,raydium-ts";

                       reg = <0x39>;

                       interrupt-parent = <&msm_gpio>;

                       interrupts = <13 0x2008>;

                       vdd_ana-supply = <&pm8916_l17>;

                       vcc_i2c-supply = <&pm8916_l6>;

                       pinctrl-names = "pmx_ts_active","pmx_ts_suspend","pmx_ts_release";

                       pinctrl-0 = <&ts_int_active &ts_reset_active>;

                       pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

                       pinctrl-2 = <&ts_release>;

                       raydium,reset-gpio = <&msm_gpio 12 0x00>;

                       raydium,irq-gpio = <&msm_gpio 13 0x00>;

                       raydium,num-max-touches = <2>;

                       raydium,soft-reset-delay-ms = <50>;

                       raydium,hard-reset-delay-ms = <100>;

                       raydium,x_max = <390>;

                       raydium,y_max = <390>;

                       raydium,display-coords= <0  0 390 390>;

                       raydium,fw_id = <0x2202>

               };

       };