Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1837a20a authored by Alok Pandey's avatar Alok Pandey Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: clean up the dtsi for sensor modules 



Rename the property name as part of clean-up work for sensor submodules.
Add new properties for regulator related control data

Change-Id: Ib5e707bf82b0ef71a1d1c66daaaa1652ffd9c30b
Signed-off-by: default avatarAlok Pandey <akumarpa@codeaurora.org>
parent 7e7607b5

arch/arm64/boot/dts/qcom/sdm845-camera-sensor-cdp.dtsi

+136 −124
Original line number Diff line number Diff line
@@ -16,9 +16,9 @@ 
		cell-index = <0>;

		reg = <0x00 0x00>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8998_flash0 &pmi8998_flash1>;

		qcom,torch-source = <&pmi8998_torch0 &pmi8998_torch1>;

		qcom,switch-source = <&pmi8998_switch0>;

		flash-source = <&pmi8998_flash0 &pmi8998_flash1>;

		torch-source = <&pmi8998_torch0 &pmi8998_torch1>;

		switch-source = <&pmi8998_switch0>;

		status = "ok";

	};
@@ -26,9 +26,9 @@ 
		cell-index = <1>;

		reg = <0x01 0x00>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8998_flash2>;

		qcom,torch-source = <&pmi8998_torch2>;

		qcom,switch-source = <&pmi8998_switch1>;

		flash-source = <&pmi8998_flash2>;

		torch-source = <&pmi8998_torch2>;

		switch-source = <&pmi8998_switch1>;

		status = "ok";

	};
@@ -78,36 +78,39 @@ 
		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cci-master = <0>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <0>;

	};



	actuator_front: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cci-master = <1>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <0>;

	};



	ois_rear: qcom,ois@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,ois";

		qcom,cci-master = <0>;

		cci-master = <0>;

		cam_vaf-supply = <&actuator_regulator>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

		regulator-names = "cam_vaf";

		rgltr-cntrl-support;

		rgltr-min-voltage = <2800000>;

		rgltr-max-voltage = <2800000>;

		rgltr-load-current = <0>;

		status = "disabled";

	};
@@ -119,12 +122,13 @@ 
		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_rear_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000 0>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;
@@ -134,22 +138,22 @@ 
			<&tlmm 80 0>,

			<&tlmm 79 0>,

			<&tlmm 27 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-vaf = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vaf = <3>;

		gpio-req-tbl-num = <0 1 2 3>;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA0",

					"CAM_VAF";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

		clock-rates = <24000000>;

	};



	eeprom_rear_aux: qcom,eeprom@1 {
@@ -160,12 +164,13 @@ 
		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_clk-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

		regulator-names = "cam_vdig", "cam_vio", "cam_vana",

			"cam_clk";

		qcom,cam-vreg-min-voltage = <1050000 0 3312000 0>;

		qcom,cam-vreg-max-voltage = <1050000 0 3600000 0>;

		qcom,cam-vreg-op-mode = <105000 0 80000 0>;

		qcom,gpio-no-mux = <0>;

		rgltr-cntrl-support;

		rgltr-min-voltage = <1050000 0 3312000 0>;

		rgltr-max-voltage = <1050000 0 3600000 0>;

		rgltr-load-current = <105000 0 80000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_rear2_active>;
@@ -174,20 +179,20 @@ 
		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		sensor-position = <0>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

		clock-rates = <24000000>;

	};



	eeprom_front: qcom,eeprom@2 {
@@ -198,12 +203,13 @@ 
		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000 0>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;
@@ -213,46 +219,47 @@ 
			<&tlmm 28 0>,

			<&tlmm 8 0>,

			<&tlmm 27 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-vaf = <3>;

		qcom,gpio-req-tbl-num = <0 1 2 3>;

		qcom,gpio-req-tbl-flags = <1 0 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-vaf = <3>;

		gpio-req-tbl-num = <0 1 2 3>;

		gpio-req-tbl-flags = <1 0 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VANA2",

					"CAM_VAF";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		sensor-position = <1>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@0 {

		cell-index = <0>;

		compatible = "qcom,cam-sensor";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <180>;

		qcom,led-flash-src = <&led_flash_rear>;

		qcom,actuator-src = <&actuator_rear>;

		qcom,ois-src = <&ois_rear>;

		qcom,eeprom-src = <&eeprom_rear>;

		csiphy-sd-index = <0>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		led-flash-src = <&led_flash_rear>;

		actuator-src = <&actuator_rear>;

		ois-src = <&ois_rear>;

		eeprom-src = <&eeprom_rear>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_rear_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000 0>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;
@@ -261,40 +268,42 @@ 
		gpios = <&tlmm 13 0>,

			<&tlmm 80 0>,

			<&tlmm 79 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0",

					"CAM_VANA";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		sensor-mode = <0>;

		cci-master = <0>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <180>;

		qcom,eeprom-src = <&eeprom_rear_aux>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_rear_aux>;

		cam_vdig-supply = <&camera_ldo>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_clk-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

		regulator-names = "cam_vdig", "cam_vio", "cam_vana",

			"cam_clk";

		qcom,cam-vreg-min-voltage = <1050000 0 3312000 0>;

		qcom,cam-vreg-max-voltage = <1050000 0 3600000 0>;

		qcom,cam-vreg-op-mode = <105000 0 80000 0>;

		qcom,gpio-no-mux = <0>;

		rgltr-cntrl-support;

		rgltr-min-voltage = <1050000 0 3312000 0>;

		rgltr-max-voltage = <1050000 0 3600000 0>;

		rgltr-load-current = <105000 0 80000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				&cam_sensor_rear2_active>;
@@ -303,42 +312,44 @@ 
		gpios = <&tlmm 15 0>,

			<&tlmm 9 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK1",

					"CAM_RESET1",

					"CAM_VANA1";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK2_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};



	qcom,cam-sensor@2 {

		cell-index = <2>;

		compatible = "qcom,cam-sensor";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,sensor-position-roll = <90>;

		qcom,sensor-position-pitch = <0>;

		qcom,sensor-position-yaw = <0>;

		qcom,eeprom-src = <&eeprom_front>;

		qcom,actuator-src = <&actuator_front>;

		qcom,led-flash-src = <&led_flash_front>;

		csiphy-sd-index = <2>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <0>;

		eeprom-src = <&eeprom_front>;

		actuator-src = <&actuator_front>;

		led-flash-src = <&led_flash_front>;

		cam_vio-supply = <&pm8998_lvs1>;

		cam_vana-supply = <&pmi8998_bob>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

		regulator-names = "cam_vio", "cam_vana", "cam_vdig",

			"cam_clk";

		qcom,cam-vreg-min-voltage = <0 3312000 1050000 0>;

		qcom,cam-vreg-max-voltage = <0 3600000 1050000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		rgltr-cntrl-support;

		rgltr-min-voltage = <0 3312000 1050000 0>;

		rgltr-max-voltage = <0 3600000 1050000 0>;

		rgltr-load-current = <0 80000 105000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_front_active>;
@@ -347,18 +358,19 @@ 
		gpios = <&tlmm 14 0>,

			<&tlmm 28 0>,

			<&tlmm 8 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-vana = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

		gpio-reset = <1>;

		gpio-vana = <2>;

		gpio-req-tbl-num = <0 1 2>;

		gpio-req-tbl-flags = <1 0 0>;

		gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2",

					"CAM_VANA1";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK1_CLK>;

		clock-names = "cam_clk";

		qcom,clock-rates = <24000000>;

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};

arch/arm64/boot/dts/qcom/sdm845-camera-sensor-mtp.dtsi

+136 −124

File changed.

Preview size limit exceeded, changes collapsed.

arch/arm64/boot/dts/qcom/sdm845-camera.dtsi

+29 −20
Original line number Diff line number Diff line
@@ -22,12 +22,13 @@ 
		compatible = "qcom,csiphy-v1.0", "qcom,csiphy";

		reg = <0x0ac65000 0x1000>;

		reg-names = "csiphy";

		reg-cam-base = <0x65000>;

		interrupts = <0 477 0>;

		interrupt-names = "csiphy";

		gdscr-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "gdscr";

		qcom,csi-vdd-voltage = <1200000>;

		qcom,mipi-csi-vdd-supply = <&pm8998_l26>;

		regulator-names = "gdscr";

		csi-vdd-voltage = <1200000>;

		mipi-csi-vdd-supply = <&pm8998_l26>;

		clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,

			<&clock_camcc CAM_CC_SOC_AHB_CLK>,

			<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
@@ -48,7 +49,8 @@ 
			"csi0phytimer_clk",

			"ife_0_csid_clk",

			"ife_0_csid_clk_src";

		qcom,clock-rates =

		clock-cntl-level = "turbo";

		clock-rates =

			<0 0 0 0 320000000 0 269333333 0 0 384000000>;

		status = "ok";

	};
@@ -58,12 +60,13 @@ 
		compatible = "qcom,csiphy-v1.0", "qcom,csiphy";

		reg = <0xac66000 0x1000>;

		reg-names = "csiphy";

		reg-cam-base = <0x66000>;

		interrupts = <0 478 0>;

		interrupt-names = "csiphy";

		gdscr-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "gdscr";

		qcom,csi-vdd-voltage = <1200000>;

		qcom,mipi-csi-vdd-supply = <&pm8998_l26>;

		regulator-names = "gdscr";

		csi-vdd-voltage = <1200000>;

		mipi-csi-vdd-supply = <&pm8998_l26>;

		clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,

			<&clock_camcc CAM_CC_SOC_AHB_CLK>,

			<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
@@ -84,7 +87,8 @@ 
			"csi1phytimer_clk",

			"ife_1_csid_clk",

			"ife_1_csid_clk_src";

		qcom,clock-rates =

		clock-cntl-level = "turbo";

		clock-rates =

			<0 0 0 0 320000000 0 269333333 0 0 384000000>;



		status = "ok";
@@ -95,12 +99,13 @@ 
		compatible = "qcom,csiphy-v1.0", "qcom,csiphy";

		reg = <0xac67000 0x1000>;

		reg-names = "csiphy";

		reg-cam-base = <0x67000>;

		interrupts = <0 479 0>;

		interrupt-names = "csiphy";

		gdscr-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "gdscr";

		qcom,csi-vdd-voltage = <1200000>;

		qcom,mipi-csi-vdd-supply = <&pm8998_l26>;

		regulator-names = "gdscr";

		csi-vdd-voltage = <1200000>;

		mipi-csi-vdd-supply = <&pm8998_l26>;

		clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,

			<&clock_camcc CAM_CC_SOC_AHB_CLK>,

			<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
@@ -121,7 +126,8 @@ 
			"csi2phytimer_clk",

			"ife_lite_csid_clk",

			"ife_lite_csid_clk_src";

		qcom,clock-rates =

		clock-cntl-level = "turbo";

		clock-rates =

			<0 0 0 0 320000000 0 269333333 0 0 384000000>;

		status = "ok";

	};
@@ -129,15 +135,16 @@ 
	cam_cci: qcom,cci@ac4a000 {

		cell-index = <0>;

		compatible = "qcom,cci";

		reg = <0xac4a000 0x4000>;

		#address-cells = <1>;

		#size-cells = <0>;

		reg = <0xac4a000 0x4000>;

		reg-names = "cci";

		interrupts = <0 460 0>;

		reg-cam-base = <0x4a000>;

		interrupt-names = "cci";

		interrupts = <0 460 0>;

		status = "ok";

		gdscr-supply = <&titan_top_gdsc>;

		qcom,cam-vreg-name = "gdscr";

		regulator-names = "gdscr";

		clocks = <&clock_camcc CAM_CC_CAMNOC_AXI_CLK>,

			<&clock_camcc CAM_CC_SOC_AHB_CLK>,

			<&clock_camcc CAM_CC_SLOW_AHB_CLK_SRC>,
@@ -150,17 +157,19 @@ 
			"cpas_ahb_clk",

			"cci_clk",

			"cci_clk_src";

		qcom,clock-rates = <0 0 0 0 0 37500000>;

		pinctrl-names = "cci_default", "cci_suspend";

		src-clock-name = "cci_clk_src";

		clock-cntl-level = "turbo";

		clock-rates = <0 0 0 0 0 37500000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cci0_active &cci1_active>;

		pinctrl-1 = <&cci0_suspend &cci1_suspend>;

		gpios = <&tlmm 17 0>,

			<&tlmm 18 0>,

			<&tlmm 19 0>,

			<&tlmm 20 0>;

		qcom,gpio-tbl-num = <0 1 2 3>;

		qcom,gpio-tbl-flags = <1 1 1 1>;

		qcom,gpio-tbl-label = "CCI_I2C_DATA0",

		gpio-req-tbl-num = <0 1 2 3>;

		gpio-req-tbl-flags = <1 1 1 1>;

		gpio-req-tbl-label = "CCI_I2C_DATA0",

					"CCI_I2C_CLK0",

					"CCI_I2C_DATA1",

					"CCI_I2C_CLK1";