Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 12c155b3 authored by Tanvi Aggarwal's avatar Tanvi Aggarwal Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: QCS605 overlay camera changes 



Add support to probe aux sensor in QCS605.

CRs-Fixed: 2151529
Change-Id: Ic0a7e9ca87e7cbb535fbdc523618657a1b72bb28
Signed-off-by: default avatarTanvi Aggarwal <tanvia@codeaurora.org>
parent acbd53b4

arch/arm64/boot/dts/qcom/qcs605-mtp-overlay.dts

+44 −0
Original line number Diff line number Diff line
@@ -32,3 +32,47 @@ 
		       <0x0001001b 0x0102001a 0x0 0x0>,

		       <0x0001001b 0x0201011a 0x0 0x0>;

};



&cam_cci {

	/delete-node/ qcom,cam-sensor@1;

	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_rear_aux>;

		cam_vio-supply = <&camera_vio_ldo>;

		cam_vana-supply = <&camera_vana_ldo>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vdig", "cam_vio", "cam_vana",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1352000 1800000 2850000 0>;

		rgltr-max-voltage = <1352000 1800000 2850000 0>;

		rgltr-load-current = <105000 0 80000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 28 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET1";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};

arch/arm64/boot/dts/qcom/qcs605-mtp.dts

+44 −0
Original line number Diff line number Diff line
@@ -26,3 +26,47 @@ 
		       <0x0001001b 0x0102001a 0x0 0x0>,

		       <0x0001001b 0x0201011a 0x0 0x0>;

};



&cam_cci {

	/delete-node/ qcom,cam-sensor@1;

	qcom,cam-sensor@1 {

		cell-index = <1>;

		compatible = "qcom,cam-sensor";

		reg = <0x1>;

		csiphy-sd-index = <1>;

		sensor-position-roll = <90>;

		sensor-position-pitch = <0>;

		sensor-position-yaw = <180>;

		eeprom-src = <&eeprom_rear_aux>;

		cam_vio-supply = <&camera_vio_ldo>;

		cam_vana-supply = <&camera_vana_ldo>;

		cam_vdig-supply = <&camera_ldo>;

		cam_clk-supply = <&titan_top_gdsc>;

		regulator-names = "cam_vdig", "cam_vio", "cam_vana",

			"cam_clk";

		rgltr-cntrl-support;

		rgltr-min-voltage = <1352000 1800000 2850000 0>;

		rgltr-max-voltage = <1352000 1800000 2850000 0>;

		rgltr-load-current = <105000 0 80000 0>;

		gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 28 0>;

		gpio-reset = <1>;

		gpio-req-tbl-num = <0 1>;

		gpio-req-tbl-flags = <1 0>;

		gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET1";

		sensor-mode = <0>;

		cci-master = <1>;

		status = "ok";

		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;

		clock-names = "cam_clk";

		clock-cntl-level = "turbo";

		clock-rates = <24000000>;

	};

};