Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 11ff8c86 authored by FUKAUMI Naoki's avatar FUKAUMI Naoki Committed by Heiko Stuebner
Browse files

ARM: dts: rockchip: add dts for ChipSPARK Rayeager PX2 board 



This add support for Rayeager PX2, Rockchip PX2 based development board
made by ChipSPARK.

Signed-off-by: default avatarFUKAUMI Naoki <naobsd@gmail.com>
Tested-by: default avatarAndy Yan <andy.yan@rock-chips.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 6e81fadb

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -392,6 +392,7 @@ dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb 
dtb-$(CONFIG_ARCH_ROCKCHIP) += \

	rk3066a-bqcurie2.dtb \

	rk3066a-marsboard.dtb \

	rk3066a-rayeager.dtb \

	rk3188-radxarock.dtb \

	rk3288-evb-act8846.dtb \

	rk3288-evb-rk808.dtb \

arch/arm/boot/dts/rk3066a-rayeager.dts

0 → 100644
+468 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "rk3066a.dtsi"



/ {

	model = "Rayeager PX2";

	compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";



	memory {

		reg = <0x60000000 0x40000000>;

	};



	ir: ir-receiver {

		compatible = "gpio-ir-receiver";

		gpios = <&gpio6 1 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&ir_int>;

	};



	keys: gpio-keys {

		compatible = "gpio-keys";

		#address-cells = <1>;

		#size-cells = <0>;



		button@0 {

			gpio-key,wakeup = <1>;

			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;

			label = "GPIO Power";

			linux,code = <116>;

			pinctrl-names = "default";

			pinctrl-0 = <&pwr_key>;

		};

	};



	vsys: vsys-regulator {

		compatible = "regulator-fixed";

		regulator-name = "vsys";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

		regulator-boot-on;

	};



	/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */

	vcc_stdby: 5v-stdby-regulator {

		compatible = "regulator-fixed";

		regulator-name = "5v_stdby";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

		regulator-boot-on;

	};



	vcc_emmc: emmc-regulator {

		compatible = "regulator-fixed";

		regulator-name = "emmc_vccq";

		regulator-min-microvolt = <3000000>;

		regulator-max-microvolt = <3000000>;

		vin-supply = <&vsys>;

	};



	vcc_sata: sata-regulator {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio4 22 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&sata_pwr>;

		regulator-name = "usb_5v";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

		vin-supply = <&vcc_stdby>;

	};



	vcc_sd: sdmmc-regulator {

		compatible = "regulator-fixed";

		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;

		pinctrl-names = "default";

		pinctrl-0 = <&sdmmc_pwr>;

		regulator-name = "vcc_sd";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <100000>;

		vin-supply = <&vcc_io>;

	};



	vcc_host: usb-host-regulator {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&host_drv>;

		regulator-name = "host-pwr";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

		vin-supply = <&vcc_stdby>;

	};



	vcc_otg: usb-otg-regulator {

		compatible = "regulator-fixed";

		enable-active-high;

		gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;

		pinctrl-names = "default";

		pinctrl-0 = <&otg_drv>;

		regulator-name = "vcc_otg";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

		regulator-always-on;

		vin-supply = <&vcc_stdby>;

	};

};



&cpu0 {

	cpu0-supply = <&vdd_arm>;

};



&emac {

	pinctrl-names = "default";

	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;

	phy = <&phy0>;

	phy-supply = <&vcc_rmii>;

	status = "okay";



	phy0: ethernet-phy@0 {

		reg = <0>;

	};

};



&emmc {

	broken-cd;

	bus-width = <8>;

	cap-mmc-highspeed;

	disable-wp;

	non-removable;

	num-slots = <1>;

	pinctrl-names = "default";

	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;

	vmmc-supply = <&vcc_emmc>;

	vqmmc-supply = <&vcc_emmc>;

	status = "okay";

};



&i2c0 {

	clock-frequency = <400000>;

	status = "okay";



	ak8963: ak8963@0d {

		compatible = "asahi-kasei,ak8975";

		reg = <0x0d>;

		interrupt-parent = <&gpio4>;

		interrupts = <17 IRQ_TYPE_EDGE_RISING>;

		pinctrl-names = "default";

		pinctrl-0 = <&comp_int>;

	};



	mma8452: mma8452@1d {

		compatible = "fsl,mma8452";

		reg = <0x1d>;

		interrupt-parent = <&gpio4>;

		interrupts = <16 IRQ_TYPE_EDGE_RISING>;

		pinctrl-names = "default";

		pinctrl-0 = <&gsensor_int>;

	};

};



&i2c1 {

	clock-frequency = <400000>;

	status = "okay";



	tps: tps@2d {

		reg = <0x2d>;

		interrupt-parent = <&gpio6>;

		interrupts = <4 IRQ_TYPE_EDGE_RISING>;

		pinctrl-names = "default";

		pinctrl-0 = <&pmic_int>, <&pwr_hold>;



		vcc1-supply = <&vsys>;

		vcc2-supply = <&vsys>;

		vcc3-supply = <&vsys>;

		vcc4-supply = <&vsys>;

		vcc5-supply = <&vcc_io>;

		vcc6-supply = <&vcc_io>;

		vcc7-supply = <&vsys>;

		vccio-supply = <&vsys>;



		regulators {

			vcc_rtc: regulator@0 {

				regulator-name = "vcc_rtc";

				regulator-always-on;

			};



			vcc_io: regulator@1 {

				regulator-name = "vcc_io";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-always-on;

			};



			vdd_arm: regulator@2 {

				regulator-name = "vdd_arm";

				regulator-min-microvolt = <600000>;

				regulator-max-microvolt = <1500000>;

				regulator-always-on;

				regulator-boot-on;

			};



			vcc_ddr: regulator@3 {

				regulator-name = "vcc_ddr";

				regulator-min-microvolt = <600000>;

				regulator-max-microvolt = <1500000>;

				regulator-always-on;

				regulator-boot-on;

			};



			vcc18: regulator@5 {

				regulator-name = "vcc18";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-always-on;

			};



			vdd_11: regulator@6 {

				regulator-name = "vdd_11";

				regulator-min-microvolt = <1100000>;

				regulator-max-microvolt = <1100000>;

				regulator-always-on;

			};



			vcc_25: regulator@7 {

				regulator-name = "vcc_25";

				regulator-min-microvolt = <2500000>;

				regulator-max-microvolt = <2500000>;

				regulator-always-on;

			};



			vccio_wl: regulator@8 {

				regulator-name = "vccio_wl";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

			};



			vcc25_hdmi: regulator@9 {

				regulator-name = "vcc25_hdmi";

				regulator-min-microvolt = <2500000>;

				regulator-max-microvolt = <2500000>;

			};



			vcca_33: regulator@10 {

				regulator-name = "vcca_33";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

			};



			vcc_rmii: regulator@11 {

				regulator-name = "vcc_rmii";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

			};



			vcc28_cif: regulator@12 {

				regulator-name = "vcc28_cif";

				regulator-min-microvolt = <2800000>;

				regulator-max-microvolt = <2800000>;

			};

		};

	};

};



#include "tps65910.dtsi"



&i2c2 {

	status = "okay";

};



&i2c3 {

	status = "okay";

};



&i2c4 {

	status = "okay";

};



&mmc0 {

	bus-width = <4>;

	disable-wp;

	num-slots = <1>;

	pinctrl-names = "default";

	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;

	vmmc-supply = <&vcc_sd>;

	status = "okay";

};



&mmc1 {

	broken-cd;

	bus-width = <4>;

	disable-wp;

	non-removable;

	num-slots = <1>;

	pinctrl-names = "default";

	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;

	vmmc-supply = <&vccio_wl>;

	status = "okay";

};



&pinctrl {

	pcfg_output_high: pcfg-output-high {

		output-high;

	};



	ak8963 {

		comp_int: comp-int {

			rockchip,pins = <4 17 RK_FUNC_GPIO &pcfg_pull_default>;

		};

	};



	emac {

		rmii_rst: rmii-rst {

			rockchip,pins = <1 30 RK_FUNC_GPIO &pcfg_output_high>;

		};

	};



	ir {

		ir_int: ir-int {

			rockchip,pins = <6 1 RK_FUNC_GPIO &pcfg_pull_default>;

		};

	};



	keys {

		pwr_key: pwr-key {

			rockchip,pins = <6 2 RK_FUNC_GPIO &pcfg_pull_default>;

		};

	};



	mma8452 {

		gsensor_int: gsensor-int {

			rockchip,pins = <4 16 RK_FUNC_GPIO &pcfg_pull_default>;

		};

	};



	mmc {

		sdmmc_pwr: sdmmc-pwr {

			rockchip,pins = <3 7 RK_FUNC_GPIO &pcfg_pull_default>;

		};

	};



	usb_host {

		host_drv: host-drv {

			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_default>;

		};



		hub_rst: hub-rst {

			rockchip,pins = <1 31 RK_FUNC_GPIO &pcfg_output_high>;

		};



		sata_pwr: sata-pwr {

			rockchip,pins = <4 22 RK_FUNC_GPIO &pcfg_pull_default>;

		};



		sata_reset: sata-reset {

			rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_output_high>;

		};

	};



	usb_otg {

		otg_drv: otg-drv {

			rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_default>;

		};

	};



	tps {

		pmic_int: pmic-int {

			rockchip,pins = <6 4 RK_FUNC_GPIO &pcfg_pull_default>;

		};



		pwr_hold: pwr-hold {

			rockchip,pins = <6 8 RK_FUNC_GPIO &pcfg_output_high>;

		};

	};

};



&pwm1 {

	status = "okay";

};



&pwm2 {

	status = "okay";

};



&saradc {

	vref-supply = <&vcc_25>;

	status = "okay";

};



&spi0 {

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;

	status = "okay";

};



&uart2 {

	status = "okay";

};



&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>;

	status = "okay";

};



&usb_host {

	pinctrl-names = "default";

	pinctrl-0 = <&hub_rst>, <&sata_reset>;

	status = "okay";

};



&usb_otg {

	status = "okay";

};



&wdt {

	status = "okay";

};