Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 10662a33 authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard
Browse files

ARM: dts: sun7i: Add dts file for Bananapro board 



Add support for the new Bananapro A20 development board from lemaker.org.
This board features 1G RAM, 2 USB A receptacles, 1 micro USB receptacle for
OTG, 1 micro USB receptacle for power, HDMI, sata, Gbit ethernet, ir receiver,
3.5 mm jack for a/v out, on board microphone, 40 gpio pins and sdio wifi.

Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 121b96cd

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -465,6 +465,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ 
	sun6i-a31s-cs908.dtb

dtb-$(CONFIG_MACH_SUN7I) += \

	sun7i-a20-bananapi.dtb \

	sun7i-a20-bananapro.dtb \

	sun7i-a20-cubieboard2.dtb \

	sun7i-a20-cubietruck.dtb \

	sun7i-a20-hummingbird.dtb \

arch/arm/boot/dts/sun7i-a20-bananapro.dts

0 → 100644
+262 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 *     You should have received a copy of the GNU General Public

 *     License along with this file; if not, write to the Free

 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,

 *     MA 02110-1301 USA

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "sun7i-a20.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/interrupt-controller/arm-gic.h>



/ {

	model = "LeMaker Banana Pro";

	compatible = "lemaker,bananapro", "allwinner,sun7i-a20";



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_bananapro>;



		blue {

			label = "bananapro:blue:usr";

			gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;

		};



		green {

			label = "bananapro:green:usr";

			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;

		};

	};



	reg_gmac_3v3: gmac-3v3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&gmac_power_pin_bananapro>;

		regulator-name = "gmac-3v3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		startup-delay-us = <100000>;

		enable-active-high;

		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;

	};



	reg_vmmc3: vmmc3 {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&vmmc3_pin_bananapro>;

		regulator-name = "vmmc3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		enable-active-high;

		gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;

	};

};



&ahci {

	status = "okay";

};



&ehci0 {

	status = "okay";

};



&ehci1 {

	status = "okay";

};



&gmac {

	pinctrl-names = "default";

	pinctrl-0 = <&gmac_pins_rgmii_a>;

	phy = <&phy1>;

	phy-mode = "rgmii";

	phy-supply = <&reg_gmac_3v3>;

	status = "okay";



	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};



&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";



	axp209: pmic@34 {

		compatible = "x-powers,axp209";

		reg = <0x34>;

		interrupt-parent = <&nmi_intc>;

		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;



		interrupt-controller;

		#interrupt-cells = <1>;

	};

};



&i2c2 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_a>;

	status = "okay";

};



&ir0 {

	pinctrl-names = "default";

	pinctrl-0 = <&ir0_pins_a>;

	status = "okay";

};



&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */

	cd-inverted;

	status = "okay";

};



&mmc3 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc3_pins_a>;

	vmmc-supply = <&reg_vmmc3>;

	bus-width = <4>;

	non-removable;

	status = "okay";

};



&ohci0 {

	status = "okay";

};



&ohci1 {

	status = "okay";

};



&pio {

	gmac_power_pin_bananapro: gmac_power_pin@0 {

		allwinner,pins = "PH23";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	led_pins_bananapro: led_pins@0 {

		allwinner,pins = "PH24", "PG2";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {

		allwinner,pins = "PH10";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



	usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {

		allwinner,pins = "PH0";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {

		allwinner,pins = "PH1";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	vmmc3_pin_bananapro: vmmc3_pin@0 {

		allwinner,pins = "PH22";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};



&reg_usb1_vbus {

	pinctrl-0 = <&usb1_vbus_pin_bananapro>;

	gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */

	status = "okay";

};



&reg_usb2_vbus {

	pinctrl-0 = <&usb2_vbus_pin_bananapro>;

	gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */

	status = "okay";

};



&spi0 {

	pinctrl-names = "default";

	pinctrl-0 = <&spi0_pins_a>;

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart2_pins_a>;

	status = "okay";

};



&uart7 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart7_pins_a>;

	status = "okay";

};



&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	usb2_vbus-supply = <&reg_usb2_vbus>;

	status = "okay";

};