Merge "ARM: dts: msm: Add Hx8399 panel support fo QRD670 SKU2" (0d404150) · Commits · e / devices / android_kernel_fairphone_FP3

arch/arm64/boot/dts/qcom/dsi-panel-hx8399-truly-singlemipi-fhd-video.dtsi

0 → 100644

+114 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&mdss_mdp {
		dsi_hx8399_truly_cmd: qcom,mdss_dsi_hx8399_truly_cmd {
		qcom,mdss-dsi-panel-name =
		"hx8399 video mode dsi truly panel";
		qcom,mdss-dsi-panel-type = "dsi_video_mode";

		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-h-left-border = <0>;
		qcom,mdss-dsi-h-right-border = <0>;
		qcom,mdss-dsi-v-top-border = <0>;
		qcom,mdss-dsi-v-bottom-border = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-color-order = "rgb_swap_rgb";
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-h-sync-pulse = <0>;
		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";
		qcom,mdss-dsi-lane-map = "lane_map_0123";
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-tx-eot-append;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-lane-1-state;
		qcom,mdss-dsi-lane-2-state;
		qcom,mdss-dsi-lane-3-state;
		qcom,mdss-dsi-t-clk-pre = <0x30>;
		qcom,mdss-dsi-t-clk-post = <0x0e>;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";
		qcom,mdss-dsi-lp11-init;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

		qcom,mdss-dsi-display-timings {
		timing@0 {
		qcom,mdss-dsi-panel-width = <1080>;
		qcom,mdss-dsi-panel-height = <2160>;
		qcom,mdss-dsi-h-front-porch = <24>;
		qcom,mdss-dsi-h-back-porch = <24>;
		qcom,mdss-dsi-h-pulse-width = <16>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <40>;
		qcom,mdss-dsi-v-front-porch = <36>;
		qcom,mdss-dsi-v-pulse-width = <2>;
		qcom,mdss-dsi-panel-framerate = <60>;
		qcom,mdss-dsi-on-command = [
		39 01 00 00 00 00 04 B9 FF 83 99
		39 01 00 00 00 00 02 D2 88
		39 01 00 00 00 00 10 B1 02 04 74 94 01
		32 33 11 11 E6 5D 56 73 02 02
		39 01 00 00 00 00 10 B2 00 80 80 CC 05
		07 5A 11 10 10 00 1E 70 03 D4
		39 01 00 00 00 00 2D B4 00 FF 59 59 0C
		AC 00 00 0C 00 07 0A 00 28 07 08 0C
		21 03 00 00 00 AE 87 59 59 0C AC 00
		00 0C 00 07 0A 00 28 07 08 0C 01 00
		00 AE 01
		39 01 00 00 05 00 22 D3 00 00 01 01 00
		00 10 10 00 00 03 00 03 00 08 78 08
		78 00 00 00 00 00 24 02 05 05 03 00
		00 00 05 40
		39 01 00 00 05 00 21 D5 20 20 19 19 18
		18 02 03 00 01 24 24 18 18 18 18 24
		24 00 00 00 00 00 00 00 00 2F 2F 30
		30 31 31
		39 01 00 00 05 00 21 D6 24 24 18 18 19
		19 01 00 03 02 24 24 18 18 18 18 20
		20 40 40 40 40 40 40 40 40 2F 2F 30
		30 31 31
		39 01 00 00 00 00 02 BD 00
		39 01 00 00 00 00 11 D8 AA AA AA AA AA
		AA AA AA AA BA AA AA AA BA AA AA
		39 01 00 00 00 00 02 BD 01
		39 01 00 00 00 00 11 D8 82 EA AA AA 82
		EA AA AA 82 EA AA AA 82 EA AA AA
		39 01 00 00 00 00 02 BD 02
		39 01 00 00 00 00 09 D8 FF FF C0 3F FF
		FF C0 3F
		39 01 00 00 00 00 02 BD 00
		39 01 00 00 05 00 37 E0 08 2A 39 35 74
		7C 87 7F 84 8A 8E 91 93 96 9B 9C 9E
		A5 A6 AE A1 AF B2 5C 58 63 74 08 2A
		39 35 74 7C 87 7F 84 8A 8E 91 93 96
		9B 9C 9E A5 A6 AE A1 AF B2 5C 58 63
		74
		39 01 00 00 00 00 03 B6 7E 7E
		39 01 00 00 00 00 02 CC 08
		39 01 00 00 00 00 06 C7 00 08 00 01 08
		39 01 00 00 00 00 03 C0 25 5A
		05 01 00 00 78 00 02 11 00
		05 01 00 00 14 00 02 29 00];
		qcom,mdss-dsi-off-command = [05 01 00 00 14 00
		02 28 00 05 01 00 00 78 00 02 10 00];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
		};
		};
		};
		};

arch/arm64/boot/dts/qcom/sdm670-qrd-sku2-overlay.dts

+20 −1

Original line number	Diff line number	Diff line
		/* Copyright (c) 2017, The Linux Foundation. All rights reserved.
		/* Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		@@ -30,3 +30,22 @@
		<0x0001001b 0x0102001a 0x0 0x0>,
		<0x0001001b 0x0201011a 0x0 0x0>;
		};

		&dsi_dual_nt36850_truly_cmd_display {
		/delete-property/ qcom,dsi-display-active;
		};

		&dsi_hx8399_truly_cmd {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,panel-mode-gpio = <&tlmm 76 0>;
		qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
		qcom,platform-reset-gpio = <&tlmm 75 0>;
		qcom,platform-te-gpio = <&tlmm 10 0>;
		};

		&dsi_hx8399_truly_cmd_display {
		qcom,dsi-display-active;
		};

arch/arm64/boot/dts/qcom/sdm670-qrd-sku2.dts

+19 −0

Original line number	Diff line number	Diff line
		@@ -24,3 +24,22 @@
		<0x0001001b 0x0102001a 0x0 0x0>,
		<0x0001001b 0x0201011a 0x0 0x0>;
		};

		&dsi_dual_nt36850_truly_cmd_display {
		/delete-property/ qcom,dsi-display-active;
		};

		&dsi_hx8399_truly_cmd {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_wled";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,panel-mode-gpio = <&tlmm 76 0>;
		qcom,mdss-dsi-mode-sel-gpio-state = "single_port";
		qcom,platform-reset-gpio = <&tlmm 75 0>;
		qcom,platform-te-gpio = <&tlmm 10 0>;
		};

		&dsi_hx8399_truly_cmd_display {
		qcom,dsi-display-active;
		};

arch/arm64/boot/dts/qcom/sdm670-sde-display.dtsi

+37 −0

Original line number	Diff line number	Diff line
		@@ -26,6 +26,7 @@
		#include "dsi-panel-nt35695b-truly-fhd-cmd.dtsi"
		#include "dsi-panel-rm67195-amoled-fhd-cmd.dtsi"
		#include "dsi-panel-nt36850-truly-dualmipi-wqhd-cmd.dtsi"
		#include "dsi-panel-hx8399-truly-singlemipi-fhd-video.dtsi"
		#include <dt-bindings/clock/mdss-10nm-pll-clk.h>

		&soc {
		@@ -465,6 +466,29 @@
		ibb-supply = <&lcdb_ncp_vreg>;
		};

		dsi_hx8399_truly_cmd_display: qcom,dsi-display@16 {
		compatible = "qcom,dsi-display";
		label = "dsi_hx8399_truly_cmd_display";
		qcom,display-type = "primary";

		qcom,dsi-ctrl = <&mdss_dsi0>;
		qcom,dsi-phy = <&mdss_dsi_phy0>;
		clocks = <&mdss_dsi0_pll BYTECLK_MUX_0_CLK>,
		<&mdss_dsi0_pll PCLK_MUX_0_CLK>;
		clock-names = "src_byte_clk", "src_pixel_clk";

		pinctrl-names = "panel_active", "panel_suspend";
		pinctrl-0 = <&sde_dsi_active &sde_te_active>;
		pinctrl-1 = <&sde_dsi_suspend &sde_te_suspend>;
		qcom,platform-te-gpio = <&tlmm 10 0>;
		qcom,platform-reset-gpio = <&tlmm 75 0>;

		qcom,dsi-panel = <&dsi_hx8399_truly_cmd>;
		vddio-supply = <&pm660_l11>;
		lab-supply = <&lcdb_ldo_vreg>;
		ibb-supply = <&lcdb_ncp_vreg>;
		};

		sde_wb: qcom,wb-display@0 {
		compatible = "qcom,wb-display";
		cell-index = <0>;
		@@ -813,3 +837,16 @@
		};
		};
		};

		&dsi_hx8399_truly_cmd {
		qcom,mdss-dsi-t-clk-post = <0x0E>;
		qcom,mdss-dsi-t-clk-pre = <0x30>;
		qcom,mdss-dsi-display-timings {
		timing@0 {
		qcom,mdss-dsi-panel-phy-timings = [00 1f 08 08 24 22 08
		08 05 03 04 00];
		qcom,display-topology = <1 0 1>;
		qcom,default-topology-index = <0>;
		};
		};
		};