Merge "ARM: dts: Optimize the gpio status at RBSC" (08be99e8) · Commits · e / devices / android_kernel_fairphone_FP3

arch/arm64/boot/dts/qcom/sdm429-spyro-qrd-evt.dtsi

+40 −6

Original line number	Original line	Diff line number	Diff line
	@@ -15,14 +15,46 @@
	#include "sdm429-spyro-qrd-evt-camera.dtsi"		#include "sdm429-spyro-qrd-evt-camera.dtsi"
	#include "sdm429-spyro-qrd-evt-audio.dtsi"		#include "sdm429-spyro-qrd-evt-audio.dtsi"

			&tlmm {
			sd_eldo_active {
			sd_eldo_active: sd_eldo_active {
			mux {
			pins = "gpio91";
			function = "gpio";
			};

			config {
			pins = "gpio91";
			drive-strength = <2>;
			bias-pull-up;
			};
			};
			};

			sd_eldo_suspend {
			sd_eldo_suspend: sd_eldo_suspend {
			mux {
			pins = "gpio91";
			function = "gpio";
			};

			config {
			pins = "gpio91";
			drive-strength = <2>;
			bias-disable;
			};
			};
			};
			};

	&gpio_key_active {		&gpio_key_active {
	mux {		mux {
	pins = "gpio91", "gpio127", "gpio128", "gpio35", "gpio126";		pins = "gpio127", "gpio128", "gpio35", "gpio126";
	function = "gpio";		function = "gpio";
	};		};

	config {		config {
	pins = "gpio91", "gpio127", "gpio128", "gpio35", "gpio126";		pins = "gpio127", "gpio128", "gpio35", "gpio126";
	drive-strength = <2>;		drive-strength = <2>;
	bias-pull-up;		bias-pull-up;
	};		};
	@@ -30,12 +62,12 @@

	&gpio_key_suspend {		&gpio_key_suspend {
	mux {		mux {
	pins = "gpio91", "gpio127", "gpio128", "gpio35", "gpio126";		pins = "gpio127", "gpio128", "gpio35", "gpio126";
	function = "gpio";		function = "gpio";
	};		};

	config {		config {
	pins = "gpio91", "gpio127", "gpio128", "gpio35", "gpio126";		pins = "gpio127", "gpio128", "gpio35", "gpio126";
	drive-strength = <2>;		drive-strength = <2>;
	bias-pull-up;		bias-pull-up;
	};		};
	@@ -142,8 +174,10 @@
	qcom,vdd-io-current-level = <200 22000>;		qcom,vdd-io-current-level = <200 22000>;

	pinctrl-names = "active", "sleep";		pinctrl-names = "active", "sleep";
	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;		pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on
	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;		&sd_eldo_active>;
			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off
			&sd_eldo_suspend>;

	cd-gpios = <&tlmm 67 0x0>;		cd-gpios = <&tlmm 67 0x0>;