Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 05140dad authored by Kiran Gunda's avatar Kiran Gunda
Browse files

ARM: dts: msm: Remove the pm8950 and pmi8950 DT files 



Remove the pm8950 and pmi8950 device tree files from the
arm32 bit folder as these files are not used any where.

Change-Id: Ied5b3c1c18a84d4ea11e3de2d0d2f018187d221b
Signed-off-by: default avatarKiran Gunda <kgunda@codeaurora.org>
parent 85a10b57

arch/arm/boot/dts/qcom/pm8950.dtsi

deleted100644 → 0
+0 −388
Original line number Diff line number Diff line 
/* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&spmi_bus {

	qcom,pm8950@0 {

		compatible ="qcom,spmi-pmic";

		reg = <0x0 SPMI_USID>;

		#address-cells = <2>;

		#size-cells = <0>;



		pm8950_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100 0x100>;

		};



		pm8950_temp_alarm: qcom,temp-alarm@2400 {

			compatible = "qcom,qpnp-temp-alarm";

			reg = <0x2400 0x100>;

			interrupts = <0x0 0x24 0x0>;

			label = "pm8950_tz";

			qcom,channel-num = <8>;

			qcom,threshold-set = <0>;

			qcom,temp_alarm-vadc = <&pm8950_vadc>;

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

			interrupts = <0x0 0x8 0x0>,

				<0x0 0x8 0x1>,

				<0x0 0x8 0x4>,

				<0x0 0x8 0x5>;

			interrupt-names = "kpdpwr", "resin",

				"resin-bark", "kpdpwr-resin-bark";

			qcom,pon-dbc-delay = <15625>;

			qcom,system-reset;



			qcom,pon_1 {

				qcom,pon-type = <0>;

				qcom,pull-up = <1>;

				linux,code = <116>;

			};



			qcom,pon_2 {

				qcom,pon-type = <1>;

				qcom,pull-up = <1>;

				linux,code = <114>;

			};

		};



		pm8950_coincell: qcom,coincell@2800 {

			compatible = "qcom,qpnp-coincell";

			reg = <0x2800 0x100>;

		};



		pm8950_mpps: mpps {

			compatible = "qcom,qpnp-pin";

			spmi-dev-container;

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pm8950-mpp";



			mpp@a000 {

				reg = <0xa000 0x100>;

				qcom,pin-num = <1>;

				status = "disabled";

			};



			mpp@a100 {

				/* MPP2 - PA_THERM config */

				reg = <0xa100 0x100>;

				qcom,pin-num = <2>;

				qcom,mode = <4>; /* AIN input */

				qcom,invert = <1>; /* Enable MPP */

				qcom,ain-route = <1>; /* AMUX 6 */

				qcom,master-en = <1>;

				qcom,src-sel = <0>; /* Function constant */

			};



			mpp@a200 {

				reg = <0xa200 0x100>;

				qcom,pin-num = <3>;

				status = "disabled";

			};



			mpp@a300 {

				/* MPP4 - CASE_THERM config */

				reg = <0xa300 0x100>;

				qcom,pin-num = <4>;

				qcom,mode = <4>; /* AIN input */

				qcom,invert = <1>; /* Enable MPP */

				qcom,ain-route = <3>; /* AMUX 8 */

				qcom,master-en = <1>;

				qcom,src-sel = <0>; /* Function constant */

			};

		};



		pm8950_gpios: gpios {

			spmi-dev-container;

			compatible = "qcom,qpnp-pin";

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pm8950-gpio";



			gpio@c000 {

				reg = <0xc000 0x100>;

				qcom,pin-num = <1>;

				status = "disabled";

			};



			gpio@c100 {

				reg = <0xc100 0x100>;

				qcom,pin-num = <2>;

				status = "disabled";

			};



			gpio@c200 {

				reg = <0xc200 0x100>;

				qcom,pin-num = <3>;

				status = "disabled";

			};



			gpio@c300 {

				reg = <0xc300 0x100>;

				qcom,pin-num = <4>;

				status = "disabled";

			};



			gpio@c400 {

				reg = <0xc400 0x100>;

				qcom,pin-num = <5>;

				status = "disabled";

			};



			gpio@c500 {

				reg = <0xc500 0x100>;

				qcom,pin-num = <6>;

				status = "disabled";

			};



			gpio@c600 {

				reg = <0xc600 0x100>;

				qcom,pin-num = <7>;

				status = "disabled";

			};



			gpio@c700 {

				reg = <0xc700 0x100>;

				qcom,pin-num = <8>;

				status = "disabled";

			};

		};



		pm8950_vadc: vadc@3100 {

			compatible = "qcom,qpnp-vadc";

			reg = <0x3100 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x0 0x31 0x0>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1800>;

			qcom,vadc-poll-eoc;

			qcom,pmic-revid = <&pm8950_revid>;



			chan@5 {

				label = "vcoin";

				reg = <5>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@7 {

				label = "vph_pwr";

				reg = <7>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@8 {

				label = "die_temp";

				reg = <8>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <3>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@9 {

				label = "ref_625mv";

				reg = <9>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@a {

				label = "ref_1250v";

				reg = <0xa>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@c {

				label = "ref_buf_625mv";

				reg = <0xc>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@36 {

				label = "pa_therm0";

				reg = <0x36>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

			};



			chan@11 {

				label = "pa_therm1";

				reg = <0x11>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

				qcom,vadc-thermal-node;

			};



			chan@32 {

				label = "xo_therm";

				reg = <0x32>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <4>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

				qcom,vadc-thermal-node;

			};



			chan@3c {

				label = "xo_therm_buf";

				reg = <0x3c>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <4>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

				qcom,vadc-thermal-node;

			};



			chan@13 {

				label = "case_therm";

				reg = <0x13>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

				qcom,vadc-thermal-node;

			};

		};



		pm8950_adc_tm: vadc@3400 {

			compatible = "qcom,qpnp-adc-tm";

			reg = <0x3400 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts =	<0x0 0x34 0x0>,

					<0x0 0x34 0x3>,

					<0x0 0x34 0x4>;

			interrupt-names =	"eoc-int-en-set",

						"high-thr-en-set",

						"low-thr-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1800>;

			qcom,adc_tm-vadc = <&pm8950_vadc>;

			qcom,pmic-revid = <&pm8950_revid>;



			chan@36 {

				label = "pa_therm0";

				reg = <0x36>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "ratiometric";

				qcom,scale-function = <2>;

				qcom,hw-settle-time = <2>;

				qcom,fast-avg-setup = <0>;

				qcom,btm-channel-number = <0x48>;

				qcom,thermal-node;

			};



			chan@7 {

				label = "vph_pwr";

				reg = <0x7>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

				qcom,btm-channel-number = <0x68>;

			};

		};



		pm8950_rtc: qcom,pm8950_rtc {

			spmi-dev-container;

			compatible = "qcom,qpnp-rtc";

			#address-cells = <1>;

			#size-cells = <1>;

			qcom,qpnp-rtc-write = <0>;

			qcom,qpnp-rtc-alarm-pwrup = <0>;



			qcom,pm8950_rtc_rw@6000 {

				reg = <0x6000 0x100>;

			};



			qcom,pm8950_rtc_alarm@6100 {

				reg = <0x6100 0x100>;

				interrupts = <0x0 0x61 0x1>;

			};

		};



		qcom,leds@a300 {

			compatible = "qcom,leds-qpnp";

			reg = <0xa300 0x100>;

			label = "mpp";

		};

	};



	pm8950_1: qcom,pm8950@1 {

		compatible ="qcom,spmi-pmic";

		reg = <0x1 SPMI_USID>;

		#address-cells = <2>;

		#size-cells = <0>;



		pm8950_pwm: pwm@bc00 {

			status = "disabled";

			compatible = "qcom,qpnp-pwm";

			reg = <0xbc00 0x100>;

			reg-names = "qpnp-lpg-channel-base";

			qcom,channel-id = <0>;

			qcom,supported-sizes = <6>, <9>;

			#pwm-cells = <2>;

		};

	};

};

arch/arm/boot/dts/qcom/pmi8950.dtsi

deleted100644 → 0
+0 −641
Original line number Diff line number Diff line 
/* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <dt-bindings/msm/power-on.h>



&spmi_bus {

	qcom,pmi8950@2 {

		compatible ="qcom,spmi-pmic";

		reg = <0x2 SPMI_USID>;

		#address-cells = <2>;

		#size-cells = <0>;



		pmi8950_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100 0x100>;

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

			qcom,secondary-pon-reset;

			qcom,hard-reset-poweroff-type =

				<PON_POWER_OFF_SHUTDOWN>;



			pon_perph_reg: qcom,pon_perph_reg {

				regulator-name = "pon_spare_reg";

				qcom,pon-spare-reg-addr = <0x8c>;

				qcom,pon-spare-reg-bit = <1>;

			};

		};



		pmi8950_vadc: vadc@3100 {

			compatible = "qcom,qpnp-vadc";

			reg = <0x3100 0x100>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0x2 0x31 0x0>;

			interrupt-names = "eoc-int-en-set";

			qcom,adc-bit-resolution = <15>;

			qcom,adc-vdd-reference = <1800>;

			qcom,vadc-poll-eoc;



			chan@0 {

				label = "usbin";

				reg = <0>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <4>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@1 {

				label = "dcin";

				reg = <1>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <4>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@3 {

				label = "vchg_sns";

				reg = <3>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@9 {

				label = "ref_625mv";

				reg = <9>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@a {

				label = "ref_1250v";

				reg = <0xa>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@d {

				label = "chg_temp";

				reg = <0xd>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <0>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <16>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

				qcom,vadc-thermal-node;

			};



			chan@43 {

				label = "usb_dp";

				reg = <0x43>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};



			chan@44 {

				label = "usb_dm";

				reg = <0x44>;

				qcom,decimation = <0>;

				qcom,pre-div-channel-scaling = <1>;

				qcom,calibration-type = "absolute";

				qcom,scale-function = <0>;

				qcom,hw-settle-time = <0>;

				qcom,fast-avg-setup = <0>;

			};

		};



		pmi8950_gpios: gpios {

			spmi-dev-container;

			compatible = "qcom,qpnp-pin";

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pmi8950-gpio";



			gpio@c000 {

				reg = <0xc000 0x100>;

				qcom,pin-num = <1>;

				status = "disabled";

			};



			gpio@c100 {

				reg = <0xc100 0x100>;

				qcom,pin-num = <2>;

				status = "disabled";

			};

		};



		pmi8950_mpps: mpps {

			spmi-dev-container;

			compatible = "qcom,qpnp-pin";

			gpio-controller;

			#gpio-cells = <2>;

			#address-cells = <1>;

			#size-cells = <1>;

			label = "pmi8950-mpp";



			mpp@a000 {

				reg = <0xa000 0x100>;

				qcom,pin-num = <1>;

				status = "disabled";

			};



			mpp@a100 {

				reg = <0xa100 0x100>;

				qcom,pin-num = <2>;

				status = "disabled";

			};



			mpp@a200 {

				reg = <0xa200 0x100>;

				qcom,pin-num = <3>;

				status = "disabled";

			};



			mpp@a300 {

				reg = <0xa300 0x100>;

				qcom,pin-num = <4>;

				status = "disabled";

			};

		};



		pmi8950_charger: qcom,qpnp-smbcharger {

			spmi-dev-container;

			compatible = "qcom,qpnp-smbcharger";

			#address-cells = <1>;

			#size-cells = <1>;



			qcom,iterm-ma = <100>;

			qcom,float-voltage-mv = <4200>;

			qcom,resume-delta-mv = <200>;

			qcom,chg-inhibit-fg;

			qcom,rparasitic-uohm = <100000>;

			qcom,bms-psy-name = "bms";

			qcom,thermal-mitigation = <1500 700 600 0>;

			qcom,parallel-usb-min-current-ma = <1400>;

			qcom,parallel-usb-9v-min-current-ma = <900>;

			qcom,parallel-allowed-lowering-ma = <500>;

			qcom,pmic-revid = <&pmi8950_revid>;

			qcom,force-aicl-rerun;

			qcom,aicl-rerun-period-s = <180>;

			qcom,autoadjust-vfloat;



			qcom,chgr@1000 {

				reg = <0x1000 0x100>;

				interrupts =	<0x2 0x10 0x0>,

						<0x2 0x10 0x1>,

						<0x2 0x10 0x2>,

						<0x2 0x10 0x3>,

						<0x2 0x10 0x4>,

						<0x2 0x10 0x5>,

						<0x2 0x10 0x6>,

						<0x2 0x10 0x7>;



				interrupt-names =	"chg-error",

							"chg-inhibit",

							"chg-prechg-sft",

							"chg-complete-chg-sft",

							"chg-p2f-thr",

							"chg-rechg-thr",

							"chg-taper-thr",

							"chg-tcc-thr";

			};



			qcom,otg@1100 {

				reg = <0x1100 0x100>;

				interrupts =	<0x2 0x11 0x0>,

						<0x2 0x11 0x1>,

						<0x2 0x11 0x3>;

				interrupt-names =	"otg-fail",

							"otg-oc",

						"usbid-change";

			};



			qcom,bat-if@1200 {

				reg = <0x1200 0x100>;

				interrupts =	<0x2 0x12 0x0>,

						<0x2 0x12 0x1>,

						<0x2 0x12 0x2>,

						<0x2 0x12 0x3>,

					<0x2 0x12 0x4>,

						<0x2 0x12 0x5>,

						<0x2 0x12 0x6>,

						<0x2 0x12 0x7>;



				interrupt-names =	"batt-hot",

							"batt-warm",

							"batt-cold",

							"batt-cool",

						"batt-ov",

							"batt-low",

							"batt-missing",

							"batt-term-missing";

			};



			qcom,usb-chgpth@1300 {

				reg = <0x1300 0x100>;

				interrupts =	<0x2 0x13 0x0>,

						<0x2 0x13 0x1>,

					<0x2 0x13 0x2>,

						<0x2 0x13 0x5>;



				interrupt-names =	"usbin-uv",

						"usbin-ov",

							"usbin-src-det",

							"aicl-done";

			};



			qcom,dc-chgpth@1400 {

				reg = <0x1400 0x100>;

				interrupts =	<0x2 0x14 0x0>,

						<0x2 0x14 0x1>;

				interrupt-names =	"dcin-uv",

							"dcin-ov";

			};



			qcom,chgr-misc@1600 {

				reg = <0x1600 0x100>;

				interrupts =	<0x2 0x16 0x0>,

						<0x2 0x16 0x1>,

						<0x2 0x16 0x2>,

					<0x2 0x16 0x3>,

						<0x2 0x16 0x4>,

						<0x2 0x16 0x5>;



				interrupt-names =	"power-ok",

							"temp-shutdown",

							"wdog-timeout",

							"flash-fail",

							"otst2",

							"otst3";

			};



			smbcharger_charger_otg: qcom,smbcharger-boost-otg {

				regulator-name = "smbcharger_charger_otg";

			};

		};



		pmi8950_fg: qcom,fg {

			spmi-dev-container;

			compatible = "qcom,qpnp-fg";

			#address-cells = <1>;

			#size-cells = <1>;

			qcom,resume-soc = <95>;

			status = "okay";

			qcom,bcl-lm-threshold-ma = <127>;

			qcom,bcl-mh-threshold-ma = <405>;

			qcom,fg-iterm-ma = <150>;

			qcom,fg-chg-iterm-ma = <100>;

			qcom,pmic-revid = <&pmi8950_revid>;

			qcom,fg-cutoff-voltage-mv = <3500>;

			qcom,cycle-counter-en;

			qcom,capacity-learning-on;



			qcom,fg-soc@4000 {

			status = "okay";

				reg = <0x4000 0x100>;

				interrupts =	<0x2 0x40 0x0>,

						<0x2 0x40 0x1>,

						<0x2 0x40 0x2>,

						<0x2 0x40 0x3>,

						<0x2 0x40 0x4>,

						<0x2 0x40 0x5>,

						<0x2 0x40 0x6>;



				interrupt-names =	"high-soc",

							"low-soc",

							"full-soc",

							"empty-soc",

							"delta-soc",

							"first-est-done",

							"update-soc";

			};



			qcom,fg-batt@4100 {

				reg = <0x4100 0x100>;

				interrupts =	<0x2 0x41 0x0>,

						<0x2 0x41 0x1>,

					<0x2 0x41 0x2>,

						<0x2 0x41 0x3>,

						<0x2 0x41 0x4>,

						<0x2 0x41 0x5>,

						<0x2 0x41 0x6>,

						<0x2 0x41 0x7>;



				interrupt-names =	"soft-cold",

							"soft-hot",

							"vbatt-low",

							"batt-ided",

							"batt-id-req",

							"batt-unknown",

							"batt-missing",

							"batt-match";

			};



			qcom,revid-tp-rev@1f1 {

				reg = <0x1f1 0x1>;

			};



			qcom,fg-memif@4400 {

				status = "okay";

				reg = <0x4400 0x100>;

				interrupts =	<0x2 0x44 0x0>,

						<0x2 0x44 0x2>;



				interrupt-names =	"mem-avail",

							"data-rcvry-sug";

			};

		};



		bcl@4200 {

			compatible = "qcom,msm-bcl";

			reg = <0x4200 0xFF 0x88E 0x2>;

			reg-names = "fg_user_adc", "pon_spare";

			interrupts = <0x2 0x42 0x0>,

					<0x2 0x42 0x1>;

			interrupt-names = "bcl-high-ibat-int",

					"bcl-low-vbat-int";

			qcom,vbat-scaling-factor = <39000>;

			qcom,vbat-gain-numerator = <1>;

			qcom,vbat-gain-denominator = <128>;

			qcom,vbat-polling-delay-ms = <100>;

			qcom,ibat-scaling-factor = <39000>;

			qcom,ibat-gain-numerator = <1>;

			qcom,ibat-gain-denominator = <128>;

			qcom,ibat-offset-numerator = <1200>;

			qcom,ibat-offset-denominator = <1>;

			qcom,ibat-polling-delay-ms = <100>;

			qcom,inhibit-derating-ua = <550000>;

		};



		qcom,leds@a100 {

			compatible = "qcom,leds-qpnp";

			reg = <0xa100 0x100>;

			label = "mpp";

		};

	};



	qcom,pmi8950@3 {

		compatible ="qcom,spmi-pmic";

		reg = <0x3 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <1>;



		pmi8950_pwm: pwm@b000 {

			status = "disabled";

			compatible = "qcom,qpnp-pwm";

			reg = <0xb000 0x100>;

			reg-names = "qpnp-lpg-channel-base";

			qcom,channel-id = <0>;

			qcom,supported-sizes = <6>, <9>;

			#pwm-cells = <2>;

		};



		labibb: qpnp-labibb-regulator {

			status = "disabled";

			spmi-dev-container;

			compatible = "qcom,qpnp-labibb-regulator";

			#address-cells = <1>;

			#size-cells = <1>;

			qcom,pmic-revid = <&pmi8950_revid>;



			ibb_regulator: qcom,ibb@dc00 {

				reg = <0xdc00 0x100>;

				reg-names = "ibb_reg";

				regulator-name = "ibb_reg";



				regulator-min-microvolt = <4600000>;

				regulator-max-microvolt = <6000000>;



				qcom,qpnp-ibb-min-voltage = <1400000>;

				qcom,qpnp-ibb-step-size = <100000>;

				qcom,qpnp-ibb-slew-rate = <2000000>;

				qcom,qpnp-ibb-use-default-voltage;

				qcom,qpnp-ibb-init-voltage = <5500000>;

				qcom,qpnp-ibb-init-amoled-voltage = <4000000>;

				qcom,qpnp-ibb-init-lcd-voltage = <5500000>;



				qcom,qpnp-ibb-soft-start = <1000>;



				qcom,qpnp-ibb-discharge-resistor = <32>;

				qcom,qpnp-ibb-lab-pwrup-delay = <8000>;

				qcom,qpnp-ibb-lab-pwrdn-delay = <8000>;

				qcom,qpnp-ibb-en-discharge;



				qcom,qpnp-ibb-full-pull-down;

				qcom,qpnp-ibb-pull-down-enable;

				qcom,qpnp-ibb-switching-clock-frequency =

									<1480>;

				qcom,qpnp-ibb-limit-maximum-current = <1550>;

				qcom,qpnp-ibb-debounce-cycle = <16>;

				qcom,qpnp-ibb-limit-max-current-enable;

				qcom,qpnp-ibb-ps-enable;

			};



			lab_regulator: qcom,lab@de00 {

				reg = <0xde00 0x100>;

				reg-names = "lab";

				regulator-name = "lab_reg";



				regulator-min-microvolt = <4600000>;

				regulator-max-microvolt = <6000000>;



				qcom,qpnp-lab-min-voltage = <4600000>;

				qcom,qpnp-lab-step-size = <100000>;

				qcom,qpnp-lab-slew-rate = <5000>;

				qcom,qpnp-lab-use-default-voltage;

				qcom,qpnp-lab-init-voltage = <5500000>;

				qcom,qpnp-lab-init-amoled-voltage = <4600000>;

				qcom,qpnp-lab-init-lcd-voltage = <5500000>;



				qcom,qpnp-lab-soft-start = <800>;



				qcom,qpnp-lab-full-pull-down;

				qcom,qpnp-lab-pull-down-enable;

				qcom,qpnp-lab-switching-clock-frequency =

									<1600>;

				qcom,qpnp-lab-limit-maximum-current = <800>;

				qcom,qpnp-lab-limit-max-current-enable;

				qcom,qpnp-lab-ps-threshold = <40>;

				qcom,qpnp-lab-ps-enable;

				qcom,qpnp-lab-nfet-size = <100>;

				qcom,qpnp-lab-pfet-size = <100>;

				qcom,qpnp-lab-max-precharge-time = <500>;

			};



		};



		wled: qcom,leds@d800 {

			compatible = "qcom,qpnp-wled";

			reg = <0xd800 0x100>,

				<0xd900 0x100>,

				<0xdc00 0x100>,

				<0xde00 0x100>;

			reg-names = "qpnp-wled-ctrl-base",

					"qpnp-wled-sink-base",

					"qpnp-wled-ibb-base",

					"qpnp-wled-lab-base";

			interrupts = <0x3 0xd8 0x2>;

			interrupt-names = "sc-irq";

			status = "okay";

			linux,name = "wled";

			linux,default-trigger = "bkl-trigger";

			qcom,fdbk-output = "auto";

			qcom,vref-mv = <350>;

			qcom,switch-freq-khz = <800>;

			qcom,ovp-mv = <29500>;

			qcom,ilim-ma = <980>;

			qcom,boost-duty-ns = <26>;

			qcom,mod-freq-khz = <9600>;

			qcom,dim-mode = "hybrid";

			qcom,dim-method = "linear";

			qcom,hyb-thres = <625>;

			qcom,sync-dly-us = <800>;

			qcom,fs-curr-ua = <20000>;

			qcom,led-strings-list = [00 01];

			qcom,en-ext-pfet-sc-pro;

			qcom,cons-sync-write-delay-us = <1000>;

		};



		flash_led: qcom,leds@d300 {

			compatible = "qcom,qpnp-flash-led";

			status = "okay";

			reg = <0xd300 0x100>;

			label = "flash";

			qcom,headroom = <500>;

			qcom,startup-dly = <128>;

			qcom,clamp-curr = <200>;

			qcom,pmic-charger-support;

			qcom,self-check-enabled;

			qcom,thermal-derate-enabled;

			qcom,thermal-derate-threshold = <100>;

			qcom,thermal-derate-rate = "5_PERCENT";

			qcom,current-ramp-enabled;

			qcom,ramp_up_step = "6P7_US";

			qcom,ramp_dn_step = "6P7_US";

			qcom,vph-pwr-droop-enabled;

			qcom,vph-pwr-droop-threshold = <3000>;

			qcom,vph-pwr-droop-debounce-time = <10>;

			qcom,headroom-sense-ch0-enabled;

			qcom,headroom-sense-ch1-enabled;

			qcom,pmic-revid = <&pmi8950_revid>;



			pmi8950_flash0: qcom,flash_0 {

				label = "flash";

				qcom,led-name = "led:flash_0";

				qcom,default-led-trigger =

						"flash0_trigger";

				qcom,max-current = <1000>;

				qcom,duration = <1280>;

				qcom,id = <0>;

				qcom,current = <625>;

			};



			pmi8950_flash1: qcom,flash_1 {

				label = "flash";

				qcom,led-name = "led:flash_1";

				qcom,default-led-trigger =

						"flash1_trigger";

				qcom,max-current = <1000>;

				qcom,duration = <1280>;

				qcom,id = <1>;

				qcom,current = <625>;

			};



			pmi8950_torch0: qcom,torch_0 {

				label = "torch";

				qcom,led-name = "led:torch_0";

				qcom,default-led-trigger =

						"torch0_trigger";

				qcom,max-current = <200>;

				qcom,id = <0>;

				qcom,current = <120>;

			};



			pmi8950_torch1: qcom,torch_1 {

				label = "torch";

				qcom,led-name = "led:torch_1";

				qcom,default-led-trigger =

						"torch1_trigger";

				qcom,max-current = <200>;

				qcom,id = <1>;

				qcom,current = <120>;

			};



			pmi8950_switch: qcom,switch {

				label = "switch";

				qcom,led-name = "led:switch";

				qcom,default-led-trigger =

						"switch_trigger";

				qcom,max-current = <1000>;

				qcom,duration = <1280>;

				qcom,id = <2>;

				qcom,current = <625>;

				reg0 {

					regulator-name = "pon_spare_reg";

				};

			};

		};



		pmi_haptic: qcom,haptic@c000 {

			compatible = "qcom,qpnp-haptic";

			reg = <0xc000 0x100>;

			interrupts = <0x3 0xc0 0x0>,

					<0x3 0xc0 0x1>;

			interrupt-names = "sc-irq", "play-irq";

			qcom,pmic-revid = <&pmi8950_revid>;

			vcc_pon-supply = <&pon_perph_reg>;

			qcom,play-mode = "direct";

			qcom,wave-play-rate-us = <5263>;

			qcom,actuator-type = "erm";

			qcom,wave-shape = "square";

			qcom,vmax-mv = <2000>;

			qcom,ilim-ma = <800>;

			qcom,sc-deb-cycles = <8>;

			qcom,int-pwm-freq-khz = <505>;

			qcom,en-brake;

			qcom,brake-pattern = [03 03 00 00];

			qcom,use-play-irq;

			qcom,use-sc-irq;

			qcom,wave-samples = [3e 3e 3e 3e 3e 3e 3e 3e];

			qcom,wave-rep-cnt = <1>;

			qcom,wave-samp-rep-cnt = <1>;

		};

	};

};