Loading hal/audio_hw.c +2 −1 Original line number Diff line number Diff line Loading @@ -718,7 +718,8 @@ static void check_and_route_capture_usecases(struct audio_device *adev, if (usecase->type != PCM_PLAYBACK && usecase != uc_info && usecase->in_snd_device != snd_device && (usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) && ((uc_info->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) && ((usecase->devices & ~AUDIO_DEVICE_BIT_IN) & AUDIO_DEVICE_IN_ALL_CODEC_BACKEND)) && (usecase->id != USECASE_AUDIO_SPKR_CALIB_TX)) { ALOGV("%s: Usecase (%s) is active on (%s) - disabling ..", __func__, use_case_table[usecase->id], Loading hal/msm8916/platform.h +10 −1 Original line number Diff line number Diff line /* * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. * Not a Contribution. * * Copyright (C) 2013 The Android Open Source Project Loading Loading @@ -47,6 +47,15 @@ enum { (AUDIO_DEVICE_OUT_EARPIECE | AUDIO_DEVICE_OUT_SPEAKER | \ AUDIO_DEVICE_OUT_WIRED_HEADSET | AUDIO_DEVICE_OUT_WIRED_HEADPHONE) /* * Below are the input devices for which back end is same, SLIMBUS_0_TX. * All these devices are handled by the internal HW codec. We can * enable any one of these devices at any time */ #define AUDIO_DEVICE_IN_ALL_CODEC_BACKEND \ (AUDIO_DEVICE_IN_BUILTIN_MIC | AUDIO_DEVICE_IN_BACK_MIC | \ AUDIO_DEVICE_IN_WIRED_HEADSET | AUDIO_DEVICE_IN_VOICE_CALL) & ~AUDIO_DEVICE_BIT_IN /* Sound devices specific to the platform * The DEVICE_OUT_* and DEVICE_IN_* should be mapped to these sound * devices to enable corresponding mixer paths Loading hal/msm8960/platform.h +10 −1 Original line number Diff line number Diff line /* * Copyright (c) 2013, The Linux Foundation. All rights reserved. * Copyright (c) 2013, 2015 The Linux Foundation. All rights reserved. * Not a contribution. * * Copyright (C) 2013 The Android Open Source Project Loading Loading @@ -35,6 +35,15 @@ enum { (AUDIO_DEVICE_OUT_EARPIECE | AUDIO_DEVICE_OUT_SPEAKER | \ AUDIO_DEVICE_OUT_WIRED_HEADSET | AUDIO_DEVICE_OUT_WIRED_HEADPHONE) /* * Below are the input devices for which back end is same, SLIMBUS_0_TX. * All these devices are handled by the internal HW codec. We can * enable any one of these devices at any time */ #define AUDIO_DEVICE_IN_ALL_CODEC_BACKEND \ (AUDIO_DEVICE_IN_BUILTIN_MIC | AUDIO_DEVICE_IN_BACK_MIC | \ AUDIO_DEVICE_IN_WIRED_HEADSET | AUDIO_DEVICE_IN_VOICE_CALL) & ~AUDIO_DEVICE_BIT_IN /* Sound devices specific to the platform * The DEVICE_OUT_* and DEVICE_IN_* should be mapped to these sound * devices to enable corresponding mixer paths Loading hal/msm8974/platform.h +9 −0 Original line number Diff line number Diff line Loading @@ -45,6 +45,15 @@ enum { (AUDIO_DEVICE_OUT_EARPIECE | AUDIO_DEVICE_OUT_SPEAKER | \ AUDIO_DEVICE_OUT_WIRED_HEADSET | AUDIO_DEVICE_OUT_WIRED_HEADPHONE) /* * Below are the input devices for which back end is same, SLIMBUS_0_TX. * All these devices are handled by the internal HW codec. We can * enable any one of these devices at any time */ #define AUDIO_DEVICE_IN_ALL_CODEC_BACKEND \ (AUDIO_DEVICE_IN_BUILTIN_MIC | AUDIO_DEVICE_IN_BACK_MIC | \ AUDIO_DEVICE_IN_WIRED_HEADSET | AUDIO_DEVICE_IN_VOICE_CALL) & ~AUDIO_DEVICE_BIT_IN /* Sound devices specific to the platform * The DEVICE_OUT_* and DEVICE_IN_* should be mapped to these sound * devices to enable corresponding mixer paths Loading Loading
hal/audio_hw.c +2 −1 Original line number Diff line number Diff line Loading @@ -718,7 +718,8 @@ static void check_and_route_capture_usecases(struct audio_device *adev, if (usecase->type != PCM_PLAYBACK && usecase != uc_info && usecase->in_snd_device != snd_device && (usecase->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) && ((uc_info->devices & AUDIO_DEVICE_OUT_ALL_CODEC_BACKEND) && ((usecase->devices & ~AUDIO_DEVICE_BIT_IN) & AUDIO_DEVICE_IN_ALL_CODEC_BACKEND)) && (usecase->id != USECASE_AUDIO_SPKR_CALIB_TX)) { ALOGV("%s: Usecase (%s) is active on (%s) - disabling ..", __func__, use_case_table[usecase->id], Loading
hal/msm8916/platform.h +10 −1 Original line number Diff line number Diff line /* * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. * Not a Contribution. * * Copyright (C) 2013 The Android Open Source Project Loading Loading @@ -47,6 +47,15 @@ enum { (AUDIO_DEVICE_OUT_EARPIECE | AUDIO_DEVICE_OUT_SPEAKER | \ AUDIO_DEVICE_OUT_WIRED_HEADSET | AUDIO_DEVICE_OUT_WIRED_HEADPHONE) /* * Below are the input devices for which back end is same, SLIMBUS_0_TX. * All these devices are handled by the internal HW codec. We can * enable any one of these devices at any time */ #define AUDIO_DEVICE_IN_ALL_CODEC_BACKEND \ (AUDIO_DEVICE_IN_BUILTIN_MIC | AUDIO_DEVICE_IN_BACK_MIC | \ AUDIO_DEVICE_IN_WIRED_HEADSET | AUDIO_DEVICE_IN_VOICE_CALL) & ~AUDIO_DEVICE_BIT_IN /* Sound devices specific to the platform * The DEVICE_OUT_* and DEVICE_IN_* should be mapped to these sound * devices to enable corresponding mixer paths Loading
hal/msm8960/platform.h +10 −1 Original line number Diff line number Diff line /* * Copyright (c) 2013, The Linux Foundation. All rights reserved. * Copyright (c) 2013, 2015 The Linux Foundation. All rights reserved. * Not a contribution. * * Copyright (C) 2013 The Android Open Source Project Loading Loading @@ -35,6 +35,15 @@ enum { (AUDIO_DEVICE_OUT_EARPIECE | AUDIO_DEVICE_OUT_SPEAKER | \ AUDIO_DEVICE_OUT_WIRED_HEADSET | AUDIO_DEVICE_OUT_WIRED_HEADPHONE) /* * Below are the input devices for which back end is same, SLIMBUS_0_TX. * All these devices are handled by the internal HW codec. We can * enable any one of these devices at any time */ #define AUDIO_DEVICE_IN_ALL_CODEC_BACKEND \ (AUDIO_DEVICE_IN_BUILTIN_MIC | AUDIO_DEVICE_IN_BACK_MIC | \ AUDIO_DEVICE_IN_WIRED_HEADSET | AUDIO_DEVICE_IN_VOICE_CALL) & ~AUDIO_DEVICE_BIT_IN /* Sound devices specific to the platform * The DEVICE_OUT_* and DEVICE_IN_* should be mapped to these sound * devices to enable corresponding mixer paths Loading
hal/msm8974/platform.h +9 −0 Original line number Diff line number Diff line Loading @@ -45,6 +45,15 @@ enum { (AUDIO_DEVICE_OUT_EARPIECE | AUDIO_DEVICE_OUT_SPEAKER | \ AUDIO_DEVICE_OUT_WIRED_HEADSET | AUDIO_DEVICE_OUT_WIRED_HEADPHONE) /* * Below are the input devices for which back end is same, SLIMBUS_0_TX. * All these devices are handled by the internal HW codec. We can * enable any one of these devices at any time */ #define AUDIO_DEVICE_IN_ALL_CODEC_BACKEND \ (AUDIO_DEVICE_IN_BUILTIN_MIC | AUDIO_DEVICE_IN_BACK_MIC | \ AUDIO_DEVICE_IN_WIRED_HEADSET | AUDIO_DEVICE_IN_VOICE_CALL) & ~AUDIO_DEVICE_BIT_IN /* Sound devices specific to the platform * The DEVICE_OUT_* and DEVICE_IN_* should be mapped to these sound * devices to enable corresponding mixer paths Loading